Garden Sheds By Dunster House. Over 25 Years Of Supplying Quality Products. Talia - W4' x D2. Water Resistant MFP Floor & Roof. Please see additional information below.
The Talia Garden Tool Shed is a practical storage solution for your power tools and other valuable garden equipment. Maximum storage is provided in minimum space, with generous 2.11m (6'11') height, ideal for long-handled tools. It features a strong 35mm x 35mm sub-frame and easy-assembly 15mm Shiplap Cladding constructed in panels, made of slow grown spruce. The shed walls are up to 25% thicker than other similar products. The Talia comes with a sturdy hasp and clasp, tool rail, and a shelf that can be fixed in a position to suit you.
It has pressure treated bearers to help protect its foundations from rot and insect infestation. Mineral roof felt included at no extra cost. Overall External Dimensions: 1.22m (4' 0") / 0.67 m (2' 2").External Width/Depth: 1.13m (3' 8") / 0.63 m (2' 0"). Ridge Height: 2.21m (7' 3). Internal Width/Depth: 1.10m (3' 7) / 0.67m (2' 2''). Internal Eaves Height: 1.82m (5' 11).
Roof Covering: Roof Felt Included. Floor Bearers: Included (Pressure Treated).
Guarantee: 10 Years on Pressure Treated Timber against Rot and Insect Infestation. DIY Assembly Time: 1-2 Days. Assembly Fixings & Instructions: All included. Water resistant and easy to install, MFP is included for the roof and floor of the Talia Shed so there are no hidden costs when ordering.The water-resistant flooring will help keep your equipment free from damp, and the roof board provides a sturdy surface. The shelf in the Tool Shed can be fixed in a position to suit you. It can be set at the height you want to easily fit your equipment and gain better access to it.
This makes the tool shed a truly flexible garden building! This rail at the rear of the shed was specially added in the design process so that you could put hooks into it and hang tools all along it.This maximises the space and minimises the clutter! Shiplap cladding is named after the old boatmaking technique where the boards overlap. This means that the natural timber can expand and contract with the seasons and not create gaps.
The curve or channel of shiplap cladding enables water to run off easily, helping to protect your toolshed from the effects of dampness. Our Toolshed is over 2 metres high, which is nearly seven feet! The door walkthrough height is 1.70m and the walkthrough width is 0.67m. You are very unlikely to bump your head once you are inside, and you can store long tools safely away in this space-saving shed, rather than trying to wedge them diagonally into a shorter building. By pressure treating our floor bearers we protect the lowest part of the building from rot and insect infestation.
This forces the treatment deep into the timber using a large pressure treatment tank. Due to this costly but effective process we can offer our customers a genuine 10 year guarantee against rot and insect infestation on the floor bearers. We do not offer installation. All our garden buildings have been designed for the DIY market and supplied with full pictorial instructions.Despite the care we take in selecting the very best Timber available, it can still be unpredictable as its very nature is to be porous and swell up when it gets wet. Any wooden product will do this throughout its life, but there are a few things you can do to help limit this movement. We would recommend that you use an appropriate water repellent treatment.
This helps minimise the amount of moisture that the timber can absorb and thus minimises the risk of any major movement. (Please note: water repellent treatment is not the same as pressure treatment). Keeping your timber building ventilated is no less important than keeping your house well ventilated. This is especially true if you plan to cover up your floorboards with something (double check with an expert, that the material is suitable to do so), as moisture can become trapped between layers of non-breathable materials and build-up, leading to floors becoming rotten.Whether you opt to build your product yourself, do not be afraid to tighten the odd bolt here and there. Your product is a long-term investment, so it is only right to give it some love and care from time to time. Make sure that it is properly treated before the rainy months, and that you make adjustments to doors and or window frames when needed. We recommend a flat, level concrete base with an allowance of at least 100mm on each side.
A 4m by 3m building would have a base of 4.2m by 3.2m. The curve or channel of shiplap cladding enables water to run off easily. Our shed models come in different sizes you can choose from.
This allows us to ensure consistent quality of our products and precise cuts made by our machines. All our products are delivered using our own fleet of vehicles, not sub-contractors. We apologise for any inconvenience, but.
E are unable to deliver to the following postcodes. ZE; HS; KW; IV; PA; KA27, 28; PH32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44; TQ6, 7, 8, 9; LD2, 3, 4, 5; EX19, 20, 21, 22, 23, 38, 39; SA3, 4, 5, 6, 7, 8, 9, 14, 15, 16, 17, 18, 19, 20, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73; PL10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35; TR; PO30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41.
Please note that goods will be delivered to the first point of contact at the front of your property e. If they feel that there is no clear access as stated above, they will have to leave the items at the kerbside. DIY Assembly Time: 1-2 Day This is an approximate time only, based on 2 people. Assembly time may vary depending on season/weather conditions, foundation type, the DIY ability of those constructing, etc. All fixings needed for assembly are supplied.
All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Colour of delivered products and or accessories, may vary from the colour shown in images. Images may also show optional extras which may not be included with the listing.All of our Pressure Treated Timber holds a 10 year guarantee against damage by insects and fungal decay. The guarantee is subject to proper installation and normal residential use. It does not include non-pressure treated wooden parts, and/or any accessories. Accessories and all other parts, including nuts, bolts, screws, washers, etc. Are covered for 1 year against manufacturing faults. This guarantee covers only the replacement of goods, it does not include any travel expenses, labour costs, or anything else involved in the installation or replacement of the parts. The guarantee is voided if the product is subjected to abuse, negligence, improper use, Acts of God, modifications, attachment to equipment other than our own, or if used for non-residential use. Timber is a natural product that may change colour over time and adapt to various weather conditions. Splits, cracks, and shakes that may appear are perfectly normal and should not affect the overall strength and durability of the timber. Wood knots and knot holes are not covered by the guarantee as these naturally occur in all wood. This item is in the category "Garden & Patio\Garden Structures & Shade\Sheds, Summerhouses & Carports".
The seller is "dunsterhouseltd" and is located in this country: GB. This item can be shipped to United Kingdom.